Vehicular Repeater System
Futurecom Systems Group ULC. 8A083X22 Rev 4_2E.docxDOC Rev. Preliminary Page 5
ANTENNA INSTALLATION
ATTENTION!
To satisfy FCC/ISED RF exposure requirements for mobile transmitting devices, refer to Futurecom
8F083X03 (FCC) or 8F083X05 (ISED) RF Safety Booklet
for the approved frequency bands, antenna types
and antenna installation restrictions and requirements.
IMPORTANT
Refer to Futurecom
8F083X03 or 8F083X05 RF Safety Booklet
for antenna installation instructions and
proper installation locations diagram.
FCC L
abel
RF Exposure Label
RF EXPOSURE LABEL INSTALLATION LOCATION
IMPORTANT
The RF Exposure Label should be affixed in the vehicle beside the mobile radio control head. The label
should be in the direct view of the Repeater operator. The label is supplied with the MOBEXCOM DVRS
Repeater.
including interference that may cause undesired
2) This device must accept any interference received,
1) This device may not cause harmful interference, and
Operation is subject to the following two conditions:
This device complies with Part 15 of the FCC Rules.
operation.
