z
Pick up the handset or press
or
to make a
hands-free call.
Or
z
Pick up the handset or press
to off-hook state.
z
Enter the telephone number.
The call duration timer will start in the display 4 seconds after the
number was dialed.
6.2 Receiving a call
z
When a call comes in, the phone will ring and the ringer LED
will blink.
z
Pick up the handset or press
or the pendant button to take
the call hands-free.
Use switch
（
23
）
to set the ringer volume.
A call that has been accepted by use of the pendant
button can also be terminated by pressing the pendant
button again.
The volume of the handset can be set to HI or LO by
using switch
（
27
）
.
6.3 Deactivating the microphone
During a call you can deactivate the microphone and talk freely
without the caller hearing you.
z
Press and hold
to mute the microphone.
During a call made with the handset you can switch to
hands-free by pressing
and hanging up the
handset.
The hands-free volume can be adjusted using the
volume button
（
10
）
.
6.4 Flash function
z
If the dialing number is busy or the conversation is completed,
press the
R
key to cut off the line for dialing other number.
When in an office equipped with PABX, this telephone makes it easy to
transfer calls.
In cast the telephone is connected to a PBX system it
might be necessary to add a pause after the PBX access
code. The phone can generate a 4 second pause time.
Example: 0 P 012345678
Press
to enter a pause.
z
Press
R
key for call-waiting.
z
Dial the extension number which caller intended.
z
When the party answers, just hang up the handset.
z
When the line is busy or nobody answers, press
R
key again to
reconnect with the caller.
6.5 Last number redial
The telephone will remember the last dialed number.
z
Pickup the handset or press
for hands-free.
z
Now press
to redial last number
6.6 Incoming Caller ID list
The telephone can store up to 64 calls in the caller ID list.
The display will show the number of total calls and the number of
8 / 11
Summary of Contents for FC-7677-2
Page 1: ......
