26
LOOP 2 BARS
Loop 2 defines the number of bars the respective part will play before forcing Loop 1 to restart, and also
defines the point which A+B, Evolution, and Phi processes will advance to their next pattern.
Loop 2 can be set from 1-64 bars.
The Loop 2 parameter can be adjusted with the Parameter knob, Switch A(-) or Switch B(+).
When using Switch A(-) or Switch B(+), the loop value will change in multiples of two since these are the
most common musical choices.
Pressing the TAP Switch will reset Loop 2 to a value of one bar.
REGEN
Regen is a third loop point, that defines how many bars will occur before both Loop 1 and Loop 2 are reset
forcing the respective part to begin playing from the first step, and also causing A+B patterns to begin playing
pattern A, or causing the Evolution and Phi patterns to be recalculated and begin playing from pattern A
again.
The Regen range can be set to OFF, meaning Evolution and Phi patterns will not automatically generate a
new pattern each time Loop 2 is reached. Instead, Evolution and Phi patterns can be manually stepped through
by the user. The Regen range can further be set to a value from 1-64 defining the number of bars regenerating
patterns will occur.
The Regen parameter can be adjusted with the Parameter knob, Switch A(-) or Switch B(+).
When using Switch A(-) or Switch B(+), the value will change in multiples of two since these are the most
common musical choices.
Pressing the TAP Switch will reset Regen to OFF.
