25.02.2011 TB-b bta badutronic 2002-2_engl.doc
4.1 Filtering (filtering the bath water) - channel 2
The power supply for the filter pump in all valve positions is provided by
the Badutronic 2002-2. Terminal 3 must not be connected. The filter
time intervals can be programmed by using channel 2 of the time switch.
4.2 Backwashing and rinsing - channel 1
The backwashing and rinsing cycle can be initiated in two different ways:
a) under time control via the internal clock program (channel 1)
b) by hand by means of a manual change-over switch from the …..
output channel 1 or by means of the external pushbutton.
After the backwashing/rinsing cycle has been started, the valve is moved
into the respectively needed position by the sequence controller of the
BADUTRONIC 2002-2.
After the RS/KS position has been reached, the filter pump is switched
on for the time respectively set. After the time has elapsed, a move is
made to the next position. The times for "backwashing" (about 1 - 11
min) and "rinsing" (about 10 - 16 sec) can in each case be set separately
via potentiometers on the electronics. During "backwashing" and
"rinsing", the filter pump is supplied with power by the BADUTRONIC
2002-2.
