850 REV04 REV DATE: 09/03/2014
Page
11
of
16
6.0 Head/Neck Mounting Support
The Prism Backs have (3) sets of holes on the top edge of the shell where
the Headrest Adaptor Bracket attaches to the shell. With the Universal
Adaptor bracket, most standard types of headrest can be mounted.
Instructions for installing a Headrest clamp:
1.
Open outer cover and determine which set of holes to use to attach the
adaptor bracket. The Bracket may be shifted 1.5” left or right
depending on the user requirements.
2.
Close the cover and carefully punch (2) holes through the cover fabric that
match the determined mounting holes.
3.
Open the front of the cover to access the appropriate mounting holes.
4.
Push the mounting screws outward through the back shell and fabric.
Place the Headrest Clamp with locknuts in-line with screws on the
outside of the back cover.
5.
Tighten both screws and close the cover.