00119777, Version 1.1
19/24
OPERATION
After connecting the device to the mains it is ready for operation. The display indicates the last operating
mode. The operating modes can be selected by means of the display and the control buttons. All settings
remain stored even if the device is disconnected from the mains. The device can be operated in stand-alone
mode via the control board or in DMX-controlled mode via any commercial DMX controller.
Stand-alone mode
In the stand-alone mode, the device can be used without controller.
Disconnect the device from the controller.
Control Board
The Control Board offers several features: you can simply set the starting address or run the pre-
programmed program.
Browse through the menu by pressing Menu. You can change the selection by pressing Up or Down. Press
Enter in order to confirm. You can leave every mode by pressing Menu. The functions provided are
described in the following sections.
Menu
Sub menu
Function
A001
A001-512
DMX address setting
5CH
3CH/7CH/5CH
Setting DMX channel mode
r255
r000-r255
Dimmer intensity of red LED color
000 – 255 (increasing)
G255
G000-G255
Dimmer intensity of green LED color
000 – 255 (increasing)
b255
b000-b255
Dimmer intensity of blue LED color
000 – 255 (increasing)
FH00
FH01-99
Strobe effect with increasing speed
CL01
CL01-CL07
Static colors
CL01 Red
CL02 Green
CL03 Blue
CL04 Cyan
CL05 Magenta
CL06 Yellow
CL07 White / Full on
CC00
CC01-CC99
Color change “switching colors” with increasing speed
dE00
dE01-dE99
Color change “fading colors” with increasing speed
CP00
CP01-CP99
Color change “pulsing colors” with increasing speed
SU01
S0-S25
Sound controlled color change 1 with blackout: program
stops automatically during periods without music or
bass-beat
Microphone sensitivity, increasing
SU02
S0-S25
Sound controlled color change 2 with Fuzzy sound
control: program continues automatically during periods
without music or bass-beat
Microphone sensitivity, increasing
