00072726, Version 1.0
50/60
Control Board
The Control Board offers several features: you can simply set the starting address, switch on and off the
lamp, run the pre-programmed program or make a reset.
The main menu is accessed by pressing Mode/Esc until the display is lit. Browse through the menu by
pressing the arrow buttons (up, down, left, right). Press Enter in order to select the desired menu. You can
change the selection by pressing the arrow buttons. Press Enter in order to confirm. You can leave every
mode by pressing Mode/Esc. The functions provided are described in the following sections.
The fixture contains a battery-buffered Control Board that stores all settings and also allows the menu to be
accessed when the fixture is not connected to power. To access the display menu via the internal battery,
press and hold the ESDC button for two seconds, this will activate the menu. The display will automatically
switch off about one minute after the last pressing of the buttons.
Default settings shaded.
Main menu
Sub menu
Display
Function
Function
Set DMX address
001~ XXX
DMX address setting
DMX value
PAN ...
DMX value display
Slave mode
Slave 1, Slave 2, Slave 3
Slave setting
Auto program
Master/Alone
Auto program
Sound control
Master/Alone
Music control
Inform
ation
Time information
Current time
XXXX (h)
Power on running
time
Total run time
XXXX (h)
Fixture running time
Last run time
XXXX (h)
Individual fixture
running time
Lamp hours
XXXX (h)
Lamp running time
Lamp off time
XXXX (min)
Operating hours since
lamp off
Last run password
Password=XXX
Timer password code
= "180"
Clean last run
ON/OFF
Clear fixture individ.
running time
Lamp time password
Password=XXX
Lamp password code
= "180"
Clean lamp time
ON/OFF
Clear lamp time
Temperature info
Head Temperature
XXX °C/°F
Inside temperature
Software version
V 1.0
Software version of
each IC
Lamp Control
Lamp on/off
ON/OFF
Lamp
on/off
Automatic on
ON/OFF
Lamp on/off/ Power
Lamp on via DMX
ON/OFF
Lamp on via DMX
Lamp off via DMX
ON/OFF
Lamp off via DMX
Max on at temp.
20-79°C,45°C/68-174°F,113°F
Lamp restart at temp.
Lamp off temp.
80-139°C,130°C/176-282°F,266°F
Lamp off at temp.
Personality
Status settings
Address via DMX
ON/OFF
Addr. via DMX
No DMX status
Close/Hold/Auto/Music
Run if no DMX
PAN reverse
ON/OFF
Reverse movement
TILT reverse
ON/OFF
PAN degree
630/540/540-90 offse
Select PAN-angle
630° or 540°
Feedback
ON/OFF
Automatic PAN/TILT
calibration
Movement speed
Speed 1 ~ 4
Adjust PAN/TILT
speed
Mic sensitivity
0~99%
Mic sensitivity
Hibernation
OFF/1-99M
Standby mode
