00056220.DOC, Version 1.0
43/48
- Status if no DMX-signal
With this function, you can select the status for the case that there is no DMX-signal. You can choose
between „CLOS“ for Blackout, „HOLD“ for holding the last position, „AUTO“ for running the internal
program and „AUDI“ for the sound-controlled program-run.
• Select
“AUTO”
by pressing
[UP]
or
[DN]
.
• Press
[ENTER]
.
• Press
[UP]
or
[DN]
to select between
"CLOS"
,
"HOLD"
,
"AUTO"
and
"AUDI"
.
• Press
[ENTER]
to confirm.
• Press
[MODE/ESC]
in order to return to the main menu.
- Adjust ventilation fan
With this function, you can adjust the ventilation fan.
• Select
"FANS"
by pressing
[UP]
or
[DN]
.
• Press
[ENTER]
to confirm; the display shows
“AUTO”
.
• Press
[UP]
to select
“HIGH”, “LOW”
or
“AUTO”
.
• Press
[ENTER]
to confirm.
• Press
[MODE/ESC]
in order to return to the main menu.
Rest
- Reset
With this function you can Reset the device via the Control Board.
• Select
“REST”
by pressing
[UP]
or
[DN]
.
• Press
[ENTER]
to confirm.
• Press
[MODE/ESC]
in order to return to the main menu.
- Restore factory settings
With this function you can restore the factory settings of the device. All settings will be set back to the
default values (shaded). Any edited scenes will be lost.
• Select
“LODA”
by pressing
[UP]
or
[DN]
.
• Press
[ENTER]
, the display shows
“ON”
or
“OFF”
.
• Press
[UP]
to select
“ON”
if you wish to enable this function or
[DN]
to select
“OFF”
if you don’t.
• Press
[ENTER]
to confirm.
• Press
[MODE/ESC]
in order to return to the main menu.
- Power standby mode
With this function you can put the device in the power standby mode. This function will be automatically
activated after a predefined period of time of no DMX activity. In standby mode the lamp/LEDs and all
motors will power down if no DMX signal is sent to the fixture for a period of 15 minutes (default setting,
can be user defined). The fixture will automatically reset and return to normal operation once a DMX
signal is sendet.
• Select
"HIBE"
by pressing
[UP]
or
[DN]
.
• Press
[ENTER]
to confirm, the display shows
“XXM”
or
"OFF"
. "X" stands for the minutes.
• Press
[UP]
or
[DN]
to select
"1-99M"
for the desired time – or
"OFF"
to deactivate this function.
• Press
[ENTER]
to confirm.
• Press
[MODE/ESC]
in order to return to the main menu.
Ver
- Software version
With this function you can display the software version of the device.
• Select
“VER”
by pressing
[UP]
or
[DN]
.
• Press
[ENTER]
, the display shows
“V-X.X”
, “X.X“ stands for the version number, e.g. “V-1.0”, “V-2.6”.
• Press
[ENTER]
to confirm.
• Press
[MODE/ESC]
in order to return to the main menu.
