00072472.DOC, Version 1.3
32/53
The maximum ambient temperature
T
a
= 45° C must never be exceeded.
Operate the device only after having become familiarized with its functions. Do not permit operation by
persons not qualified for operating the device. Most damages are the result of unprofessional operation!
Please use the original packaging if the device is to be transported.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons!
Never remove the serial barcode from the device as this would make the guarantee void.
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, crash etc.
DESCRIPTION OF THE DEVICE
Features
High performance LED Moving Head
• Equipped with a 150 W COB LED
• With integrated wireless receiver for WDMX operation
• Supports RDM (Remote Device Management)
• 21, 23 or 24 DMX channels selectable
• Effect wheel with rotating 3-facet prism and 8-facet prism and frost filter
• Color wheel with 8 different dichroic color filters plus white
• Rainbow effect with adjustable speed in both directions
• Gobo wheel with 7 rotating gobos plus open
• All gobos can be interchanged
• Slot-in gobo system for exchanging gobos without tools
• With gobo shake function
• Gobo wheel 2 with 7 static gobos plus open
• Exact positioning via 16 bit PAN/TILT movement resolution
• Motorized focus
• Autofocus
• Steplessly adjustable iris
• Dimmer
• Strobe effect with adjustable speed
• Random strobe effect
• Automatic position correction
• PAN angle switchable between 540° and 630°
• Sound-controlled via built-in microphone
• Switch-mode power supply
• Automatic power supply adaption between 100 and 240 Volts without power selector
• Control board with graphic LCD display and foil-keyboard for adjusting the DMX-starting address,
PAN/TILT reverse, reset
• DMX-controlled operation or stand-alone operation with Master/Slave function
• The scenes can be modified via the Control Board or via an external controller and loaded into the memory
• Number of scenes can be changed individually
• Software upload by optional accessories via DMX link
• Power connection via Neutrik PowerCon jack and included power cable
• Feed-through output allows to power another device
• After every 8 device the fixtures must have a renewed connection with the power mains
• DMX control via every standard DMX controller