00083755.DOC, Version 1.2
33/40
OPERATION
Switch on the device with the power switch. The unit requires a short initialization process and is then ready
for operation. The display shortly inserts the firmware version and you can choose the desired mode via the
buttons MENU, ENTER, UP and DOWN.
The device has two operating modes. It can be operated in stand-alone mode via the control board or the
remote control or in DMX-controlled mode via a standard DMX controller and/or wireless transmitter.
Control Board
The Control Board offers several features: you can simply set the starting address, run the pre-programmed
program or select a DMX channel mode.
Browse through the menu by pressing Menu. Press Enter in order to
select the desired menu. You can change the selection by pressing Up or
Down. Press Enter in order to confirm. You can leave every mode by
pressing Menu. The functions provided are listed in the following sections.
Main Menu
Menu level 2
Menu level 3
Description
Auto Show
Auto Show
Speed
Auto program
Speed:
0-100 (increasing)
Default setting: Auto 0, 100
<Auto 0>
0~100
<Auto 1>
0~100
<Auto 2>
0~100
<Auto 3>
0~100
<Auto 4>
0~100
<Auto 5>
0~100
<Auto 6>
0~100
<Auto 7>
0~100
<Auto 8>
0~100
<Auto 9>
0~100
Static
<Fixed Color>
Fixed Color
Static colors
Default setting: RGBW
<R>
<G>
<B>
<W>
<GB>
<RB>
<RG>
<RGB>
<RW>
<GW>
<BW>
<RGW>
<RBW>
<GBW>
<RGBW>
<Manual Color>
Value
Dimmer intensity of LED colors
Default setting
：
RGBW = 255
<R=255>
<G=255>
<B=255>
<W=255>
Sound Mode
<Sound 0>
Sound controlled program
Default setting: Sound 0
<Sound 1>
<Sound 2>
<Sound 3>
<Sound 4>
<Sound 5>
<Sound 6>
<Sound 7>
<Sound 8>
<Sound 9>
Sensitivity 0~100
Microphone sensitivity
: 0-100
Default setting
：
80
