BLACK LINE
FOR TEST FK1108
FUTURE KIT
R
Page 1: ...g of PCB poles and components before soldering as shown in Fig 3 For IDE port press the pin of IDE port to be level with the black plastic before soldering as shown in Fig 4 Use a max 40W solder and soldering tin with a tin and lead ratio of 60 40 together with a joint solution inside Recheck the assembled circuit for your own confidence Better use a lead sucker or a lead wire absorber in case of ...
Page 2: ...nto body robot Solder electric wire at motor pole with red wire solders at left hand side and black wire solders at right hand side 3 Mount motors each with two 4 x 1 4 screws 4 Solder motor wire to BR002 1 PC board Red wire is positive pole and black wire is negative pole Character L is left motor gear and R is right motor gear 5 6 Mount BR002 1 PC board into body robot and secure them with two 2...
Page 3: ...BLACK LINE FOR TEST FK1108 FUTURE KIT R ...
