![background image](http://html1.mh-extra.com/html/future-kit/avr1-super-sumo-robot/avr1-super-sumo-robot_manual_2352059002.webp)
http://www.futurekit.com
HIGH QUALITY ELECTRONIC KIT SET FOR HOBBY & EDUCATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
RED
BLACK
Sensor Board
15
16
(2) ROBOT BODY
Assembling Steps of the Body set.
Mini Caster
Flat head nut
2.5x10 and NUT M2.5
Screw 2x1/4
Install battery holder to body robot with flat head nut 2.5x10 and nut M2.5.
Take off the both screw of motor gear and then mount the motor lock.
Secure with the both screw of motor gear.
Install the wheels onto the
shaft of the gear motors and
secure them with the
remaining two #4 x 1/4"
pointy screws.
Install the control board
into body robot.
Insert the electric wire
battery holder into
body robot.
Solder electric wire at motor pole with
red wire solders at left hand side and
black wire solders at right hand side.
Mount motors, each with
two #4 x 1/4" screws
Solder motor wire to BR002-1 PC-
board. Red wire is positive pole and
black wire is negative pole. Character
"L" is left motor gear and "R" is right
motor gear.
Mount BR002-1 PC-board into
body robot and secure them
with two #2 x 1/4" screws.
Solder battery holder wire to
BR002-1 PC-board at B1 and B2.
Red wire is positive pole and Black
is negative pole.
The robot is prompt working and playing.
Fix a mini caster wheel set to the Body set
with using a 12 mm. bolt as a holder.
Screw 4x1/4
Screw 4x1/4
Screw 2x1/4
Screw 4x3/4
Mount sensor board into body robot and
secure with two #2 x 1/4" screws.
Secure control board
with two #4 x 3/4" screws.
Flat head nut
2.5x10 and NUT M2.5
Install the plastic pin hold to body robot
with flat head nut 2.5x10 and nut M2.5.
After then install the front plate to the
plastic pin hold with flat head
nut 2.5x10 and nut M2.5.