At on-hook state, press [SET] key, it will show “-12345-”
on LCD display, then press number 1, the LCD will show
the blinking YEAR. Then press [UP] and [DOWN] key to
adjust it. After the setting of Year is finished, press [SET]
key to confirm and enter the setting of Month. The Month
is set in the same way for Year, and then set Day, Hour,
Minute likewise.
Set the Flash Time
At on-hook state, press [SET] key, it will show “-12345-”
on LCD display, then press number 2, the LCD will show
“FLASH 1000”, it means that the flash time is 1000mS.
Press [UP] and [DOWN] key to adjust it among 100 mS,
300 mS, 600 mS and 1000 mS. After the setting is finished,
press [SET] key to confirm.
Setting the Out-of-area Code (OAC)
At on-hook state, press [SET] key, it will show “-12345-”
on LCD display, then press number 3 and enter the setting
of OAC, the LCD will show “OCODE-”. Press [UP] and
[DOWN] key to set the number of OAC. After the setting is
finished, press [SET] key to confirm.
Set the Local Area Code (LAC)
At on-hook state, press [SET] key, it will show “-12345-”
on LCD display, then press number 4 and enter the setting
of LAC, the LCD will show “AREA-”. Press [UP] and
[DOWN] key to set the number of LAC. After the setting is
finished, press [SET] key to confirm.
Set the Brightness
At on-hook state, press [SET] key, it will show “-12345-”
on LCD display, then press number 5 and enter the setting
of brightness, the LCD will show “LCD-3”. Press [UP] and
[DOWN] key to adjust the brightness of LCD. After the
setting is finished, press [SET] key to confirm.
