36
The left button shows which option is actually selected:
•
Button off (does not shine): adjust BPM
The right LED flashes yellow in the clock speed of the adjusted BPM. Turn the
left knob or tap the left button ("Tap Tempo") as beat to adjust the clock speed
(in BPM).
Hint: Enter the clock speed by tapping the left button ("Tap Tempo") or the left foot switch.
•
Left Button shines blue: select Clock Source
The right button shows which source is selected. Turn the left knob and select
between:
1.
Right Button shines red: internal Clock
The MIDI LOOPER clocks in BPM clock speed, which you can select in the
MIDI LOOPER (see hereto first menu option, if left LED is off)
2.
Right button shines yellow: Clock of MIDI In
3.
Right button shines green: Clock of USB
Note: You can stop and start the MIDI LOOPER via MIDI signals (MIDI Start command).
•
Left Button shines pink: MIDI Thru and USB Thru on-/off
The right button shows, if MIDI Thru is on or off. Turn the left knob and select
between:
1.
Right button shines red: MIDI Thru is off
2.
Right button shines green: MIDI Thru is on
Note: The MIDI Thru function means that data received at the MIDI IN will be output to
the MIDI OUT immediately. This corresponds to the behavior of a MIDI thru connector.
The USB Thru function means that data received at the MIDI IN is immediately output to
the USB. This corresponds to the functionality of a MIDI USB interface and allows the direct
playing of software instruments.
MIDI Thru and USB Thru can be useful or unwanted, depending on the application. They
can only be switched on and off together.
After starting the MIDI LOOPER, MIDI Thru and USB Thru are always switched on.