Operation:
(Fig. 4 and 5)
1. The heater must be supplied with proper voltage and frequency
(AC220-240V, 50Hz), and connected to an individual, properly
grounded branch circuit, protected by a circuit breaker which in
accordance with wiring rules.
2. Only operate the heater after it is fixed. Our Electric Heater is
equipped with remote controller.
3. To operate the heater, please firstly turn on the On/Off Switch. Then
switch on the heater head is used the remote controller (5). There are
3 heating settings on remote controller 750W/ 1500W/ 2000W.
Fig. 4 Attachment Installation
Fig. 5 Remote Control
On/Off Switch
