GENERAL PRECAUTIONS.
Before using the equipment read the following carefully.
Following points are to be taken care of while using the equipment. These
will protect the equipment from malfunction and any damage.
#
Any external continuity meter like buzzer, bulb or multimeter should be
strictly avoided. Use of these will damage the internal electronic delicate
components.
#
The tester is designed to work for 230V AC with ± 10% of fluctuation. If the
voltage goes below the specified voltage; the tester will not work as expected. It is
advisable to have a voltage stabilizer preferably a CVT.
#
While changing the board; removal and fitting of D type connectors on the back
side of the tester, should be done with utmost care. These connectors are polarised
and hence should not be inserted in wrong direction. There is a tendency to push
the connector hard in the tester even if polarisation is incorrect. Pushing might
damage the connectors on the tester.
# The tester has a long life and does not need much of maintenance if used
carefully. The maintenance is required for the rig or mounting board.
