
A D V A N C E D S E N S O R T E C H N O L O G Y , I N C .
FUTEK
ADVANCED SENSOR TECHNOLOGY, INC.
LSB200 MANUAL
PREFACE
www.futek.com
10 Thomas, Irvine, CA 92618 USA · (949) 465-0900
EM1007 · 2
For specifications, dimension, and capacities, please refer to the LSB200 spec sheet:
http://www.futek.com/files/pdf/Product%20Drawings/lsb200.pdf
MEASURING END
The top of the sensor is the measuring end.
PRECAUTIONS
Remove the shunt before applying any load.
Make sure the cover is not touching the measuring end of the load cell.
Install the LSB200 in a dry, clean environment for optimum performance and to prevent short
circuiting the sensor.
DISCLAIMER
This documentation was generated and completed to the best ability of
FUTEK’s Engineering Team. The information and recommendations on this
document are presented in good faith and believed to be correct however,
FUTEK Advanced Sensor Technology makes no representations or warranties
as to the completeness or accuracy of the information.
DO NOT USE these products as safety or emergency stop devices, or in
any other application where failure of the product could result in
personal injury. Failure to comply with these instructions could result in
death or serious injury.
Via Paolo Uccello 4 - 20148 Milano
Tel +39 02 48 009 757 Fax +39 02 48 002 070 [email protected] www.dspmindustria.it