Futek IPM490, Manual, Page: 15 / 39

- 15 -
REQUEST COUNTER VALUES
All active items *1B0
Item 1 *1B1
Item 2 *1B2
Item 3 *1B3
Peak *1B4
Displayed item *1B5
Valley only *1B6
All active items + Peak + Valley *1B7
RESET FUNCTIONS, DPM & SCALE METER
Cold reset *1C0 Reads NVMEM into RAM locations after RAM is zeroed.
Latched alarms reset *1C2
Peak value reset *1C3
Remote display reset *1C4
External Input B true *1C5
External Input B false *1C6
External Input A true *1C7
External Input A false *1C8
Valley reset *1C9
Tare function *1CA
Tare reset *1CB
RESET FUNCTIONS, COUNTER / TIMER
Cold reset *1C0 Reads NVMEM into RAM locations after RAM zeroed.
Function reset *1C1 Resets all total values and/or peak value.
Latched alarms reset *1C2
Peak value reset *1C3
Remote display reset *1C4 Resets Item 3 to zero if not Arith or Batch.
Removes Alarm View or Peak View if on.
External Input B true *1C5
External Input B false *1C6
External Input A true *1C7
External Input A false *1C8
Valley value reset *1C9
7.3 READING AND WRITING TO RAM AND NONVOLATILE MEMORY
CHARACTERS 1, 2
The Recognition character and Meter Address Code are the same as shown in previous table.
CHARACTER 3
Command character: