TEMPPOINTER
1
5
D:S = 12:1
240 600 1200
ø20
ø50
ø100
MANUAL
How big is the measuring area?
The further you are of the object whose temperature you want to measure, the gre-
ater the measurement area. The larger the measuring surface, the less the accuracy.
We therefore recommend using the camera as close as possible to the objects to be
measured.
This infrared thermometer has a measurement ratio of 12: 1. This means that when
measuring at a distance of 12cm of the object, the measuring surface is approximate-
ly 1x1cm in size. The projected laser beam indicates the center of the measurement
range.
GOOD TO KNOW…
∙ An infrared thermometer must adapt to ambient temperature. This may take up to
30 minutes to adjust to high temperature fluctuations. So wait a few minutes bet-
ween measuring a hot and cold object.
∙ An infrared thermometer can not be measured through transparent surfaces (eg.
glass). He will then measure the temperature of the glass.
∙ Steam, dust, smoke ... make measurements with an infrared thermometer less accu-
rate to unreliable..
SAFETY
Be very careful when the laser is activated. Never aim the device on any person’s /
animal’s eyes. Never look directly or indirectly (eg through reflection) in the laser
beam. Never point the laser to a gas that can explode.
Summary of Contents for TEMPPOINTER1
Page 1: ...TEMPPOINTER1 MANUAL...
