background image

Thank you for purchasing a Futaba 

TMA-1

 Telemetry 

adapter. This 

TMA-1

 displays the telemetry data from 

a telemetry receiver on a tablet or smart phone. 

TMA-

1

 is connected on a tablet or smart phone. An exclusive 

application is downloaded to the tablet or a smart phone. 
Telemetry data can be seen more legible. 

Connection Method

Required

Connections and Name of Each Part of the TMA-1

Neither water nor fuel must adhere to TMA-1.

As with any electronic components, proper 

precautions are urged to prolong the life and 

increase the performance of the TMA-1. 

Do not use the TMA-1 with anything other than an 

R/C model.    

An operator must not look at a screen.    

You may loose sight of the aircraft during 

flight and this is extremely dangerous. Have an 

assistant on hand to check the screen for you.  A 

pilot should NEVER take his eyes off his aircraft.

WARNING

 

● Tablet or smart phone.

      The conditions of tablet or smart phone

● FASSTest or T-FHSS telemetry system transmitter and receiver .
● Telemetry sensor .

◆ USB to electric supply is possible. ◆ Dual core ◆ OS :Android 

™ 

3.2 ~

◆ Memory:RAM 1GB ~ ROM  16GB ~ ◆ Internet connectivity

Clip holder

OTG (USB On-The-Go) host cable

In Telemetry Receiver

In Telemetry Sensor

The selected Model 

TMA-1 Receiver and TMA-1 

are made to link.

The power supply of TMA-1 is supplied 

from tablet or smart phone.

It has the same setup of 

a sensor  slot  number 

in the transmitter. 

 FASSTest or T-FHSS receiver

The telemetry data of the 
altitude, temperature, etc. 
displays.

OTG host cable

The application of TMA-1 was installed in 
either your tablet or smart phone.

Telemetry Receiver(Option)

● Telemetry Receiver(Option)

SBS-01T,SBS-01TE(Temperature sensor)

SBS-01A(Altitude sensor)

SBS-01RM(Magnet type R.P.M sensor)

SBS-01RO(Optical type R.P.M sensor)

SBS-01G(GPS sensor)

SBS-01V(Voltage sensor)

(2014. 10)

The manual of the application 
of a TMA-1 and the application 
is downloaded from the WEB 
site of Futaba.

TMA-1 ratings

1M23N29802

TMA-1

Cover

Link button

LED

Instruction Manual

TMA-1

Telemetry Adapter

Applicable systems: Futaba FASSTest, T-FHSS Telemetry system

 

 

• Size: 2.69 x 1.21 x 0.46 in. (68.3 x 30.8 x 11.6mm)

• Weight: 0.54 oz. (15.4g)

• Current drain: 140mA or less

Summary of Contents for TMA-1


























Reviews: