The Gyro Link is a function that allows you to set the parameters of the car gyro wirelessly from the
transmitter.
* A gyro compatible with the wireless setting
:
GYD550 (As of April 2020)
8SWR¿YHSUHVHWVFDQEHVZLWFKHGZKLOHGULYLQJ*\URGDWDVZLWFKLQJIXQFWLRQ
7KH6%86VHUYRGDWDFDQEHVHWZLUHOHVVO\IURPWKHWUDQVPLWWHUYLDWKHJ\UR
$UHFHLYHUFRPSDWLEOHZLWKWKHZLUHOHVVVHWWLQJIXQFWLRQLVUHTXLUHG$VRI$SULO56%656%6(LVFRPSDWLEOHZLWK
ZLUHOHVVVHWWLQJ3OHDVHXSGDWHWKHSUHYLRXVUHFHLYHUWRYHUVLRQRUODWHU
:KLOHXVLQJ*\UR/LQNZLUHOHVV6%86VHUYRDGMXVWPHQWZLOOQRWIXQFWLRQ
7REHDEOHWRFRQWUROJ\URJDLQHWFIURPWKHWUDQVPLWWHULWLVQHFHVVDU\WRHQDEOHWKHJ\URPL[LQJIXQF
tion of the transmitter.
(Preparation)
- Connect the receiver and gyro according to the connection diagram below.
* The connection diagram is a reference diagram for selecting the gyro link connection method. Please read the gyro instructions for details
or cautions.
- Turn on the power switch PWR of the transmitter to display the Gyro Link screen.
* Note that this cannot be used with the display switch DSP.
- Turn on the receiver power switch.
1
(Gyro read)
When you open the Gyro Link screen from the Accessory menu or Custom menu, the connection method selec-
tion screen is displayed. Tap the button according to the connection method between the gyro and the receiver.
The Gyro type and currently set contents are read.
Using the Gyro Link function
Additional function / Wireless Gyro setting (Gyro Link)
V7.0
If "Failed" is displayed on the screen, communication
with the gyro has not been performed normally.
Check receiver, gyro and batter y connections,
transmitter and receiver power switches, and repeat
reading.
Home screen
Menu screen
Accessory menu screen
Gyro Link
Menu-2
Menu-1
When not using S.BUS connection,
select
[Wireless 1 (receiver Ch1)]
* When the S.BUS connection is
not used, the gyro data switching
function cannot be used, so only
[Gyro data 1]
is displayed.
When using S.BUS connection,
select
[Wireless (receiver S.BUS2)]
GYD550
Connect the power supply
of the receiver to the B/C
connector or each of CH1
to CH4.
Receiver
Gyro gain CH3
Gyro
Steering servo
Steering CH1
GYD550
Connect the power supply
of the receiver to the S.
BUS2 connector or each of
CH1 to CH4.
Gyro
Steering servo
S.BUS Receiver
S.BUS/S.BUS2 port
*
Do not use the Gn
