FUTABA T18MZ Software Update Changes Download Page 1

1M23N26419

T18MZ SOFTWARE UPDATE CHANGES

(Editor Version: 2.6 Encoder version: 2.3)

This software updates or alters the functions and features noted below.  The instructions and information that follow are meant as a supplement to the original instruction 
manual that accompanied the T18MZ transmitter.  Please refer to the original instruction manual where applicable, but replace the steps indicated below with these 
instructions. Please note that the software update will be finalized the first time that the T18MZ is powered up, after the software has been applied.  As such, it may require a 
few moments before the Start screen appears.  Please check to ensure that the update has been installed.
1) Select the System Menu.
2) Touch the [Information] button.
3) Confirm that the information in the display indicates the Editor and Encoder version numbers as noted above.
4) If you would like to copy model data from a T18MZ-WC to a T18MZ, update the T18MZ to the latest software.
5) Even if you update not a T18MZ-WC but a T18MZ to the latest software, T-FHSS is still not available for the T18MZ.
6) If you copy model data whose system type is T-FHSS into a T18MZ, the system type of it will be converted to FASSTest automatically.

1. SBS-01C current sensor function

The T18MZ has been made compatible with the SBS-01C current sensor. 

*Refer to the manual of SBS-01C for the details of wiring.

*Current sensor SBS-01C is required.

ŏ,1+ń$&76RXQGVD

voice alert in addition 

to the alarm sound 

when the alarm is 

activated.

ŏ6HOHFWVWKHVHQVRU

displayed on home 2 

screen. 

ŏ'LVSOD\VWKHPD[LPXP

and minimum value 

ranges. [Clear] to reset.

ŏ&KDQJHRI

a numerical 

value

ŏ3UHVVWRVHWXSYLEUDWLRQDOHUWV

W\SHVRIYLEUDWLRQVHOHFWLRQVDUHSRVVLEOH

ŏ5HWXUQWR

7HOHPHWU\

ŏ'ULYH

EDWWHU\

voltage

ŏ'ULYH

EDWWHU\

current

ŏ'ULYH

EDWWHU\

capacity

Current / Voltage / Capacity Display 

ŏ7KLV GLVSOD\ LV WKH PD[LPXP DQG

minimum after starting reception until 

the transmitter is turned off.

ŏ3UHVVWRVHWXSDQDOHUW

 

The SBS-01C has the capability of measuring 

current, voltage and capacity from drive battery at 
the same time.  

ŏ,IWKLVYDOXHLVH[FHHGHG

the alarm will operate

ŏ,ILWEHFRPHVORZHUWKDQWKLV

YDOXHWKHDODUPZLOORSHUDWH

PLQPD[

PLQPD[

ŏ&DOOWKHIROORZLQJVHWWLQJVFUHHQE\SUHVVLQJWKH

>7HOHPHWU\@EXWWRQRIWKH/LQNDJH0HQX

Summary of Contents for T18MZ









Reviews: