126
Helicopter
Function
Method
① Call the menu screen from the
home screen by pressing the
+
key
for 1 second.
＋
② Select
from the menu with the
Jog key
.
③ Open the setting screen by
pressing the
Jog key
.
（1 second）
Calling the setting screen
This swash mixing function limits swash travel
to prevent damage to the switch linkage due to si-
multaneous aileron and elevator operation. If is ef-
fective in 3D aerobatics with a large steering angle.
"SWH.RING"
● Aileron and elevator stick operation is limited
to within the circle (swash mixing) in the figure
shown at the right. (When rate is 100%)
← AIL operation →
← ELE operation →
SwashRing
50%
100%
SWH.RING
Swash ring
(HELICOPTER)
■ Activating the function
① Select the
"MIX"
item and then select the
"ON"
by pressing the
+ key
or
– key
.
＋
－
or
● When you do not use a function, set to
the "INH" side.
■ Setup of rate
＋
－
or
② Select the
"RATE"
item and
then adjust the mixing rate
by pressing the
+ key
or
–
key
.
Range：
50 ～ 200%
Default：
100%
● When you want to return the set value to the initial
value, press the
+ key
and
– key
simultaneously.
NOTE：
Adjust the swash mixing rate to the largest swash
inclination at which the linkage rod does not interfere.
Swash Ring
Activating the function
Swash Ring rate
● When not using this function,
select INH.
● Select the setting item
with the
Jog key
.
● Adjusts the operable range (swash mixing) of the
aileron and elevator sticks.
● Displays the actual aileron
a n d e l e v a t o r c o m b i n e d
travel when the stick is
manipulated.
SWH.RING
