8
Installation of bottom wing dowel, top wing T-nut
Attach the dowels to the bottom wing. Then cut two M3 screw holes in the bottom wing. Adhere the
reinforcing plate of the screw hole to the bottom wing. Cut the adhesive film beforehand.
Cut the film in the M3 screw mounting hole of the top wing. Place the top wing on the fuselage and check
the position of the T-nut mounting hole. If the position is correct, install T-nut. If holes are misaligned, correct
them before installing T - nut.
（写真㊱〜㉒参照）
Installation of receiver, ESC, switch
Install the receiver, ESC, switch as shown in the following picture. Each wire is fixed.
37
36
40
38
39
Summary of Contents for SkyLeaf Leader
Page 1: ...1M23Z06706 3 5 PRGHO RU FRPSHWLWLRQ LSODQH 3 PRWRU...
Page 19: ......
