ADJUSTMENTS AND FLIGHT TECHNIQUES
•2ND ATV (CONVENTIONAL)
2ND ATV is available on the aileron and elevator
channels. This is the conventional type ATV and is
set using trimmers [34], [35), [36], and [37] on the
transmitter back panel.
Servo movement can be adjusted from 0 to 100%.
These adjustments are retained even if the trans-
mitter battery reaches a full discharge state (Mem-
ory ATV settings are not.).
When the ATV trimmer is turned clockwise, the
steering angle increases. When the ATV trimmer is
turned counterclockwise, the steering angle de-
creases. The steering angle can be adjusted from 0
to 100%.
[34]Aileron right-
[35]Aileron left-
[36] Elevator up
[37] Elevator down
Fig. 24
SERVO REVERSING SWITCHES
These switches reverse the direction of rotation of
the servos. They are convenient when connecting
the linkage.
19
NORM: Forward
REV:
Reverse
[40] Throttle
[38]Aileron
[39]Elevator-
[42]CH5 switch channel
Fig. 25
[44] Spoiler
[45]Pitch control
[41]Rudder
