manualshive.com logo in svg

FUTABA 3PKS, Instruction Manual, Page: 46 / 116

Share
Download
FUTABA 3PKS Instruction Manual Download Page 46

46

F

u

nction

(Opening Screen)

 MENU 1

Press t

he

button

Calling the setup screen

(Opening Screen)

 MENU 2

 DIRECT SEL

*Calling from menu screen

Press the button set 
at this function.

MENU1/2 selection 
by

button

Menu screen call 
by

button

Select the function 
by

button

Press t

he

button

*  When  the  direct  call  button  is  set, 
the setup screen is also called by the 
following method:

•Select the setting item by 

button

* b l i n k s  a t  t h e  c u r r e n t 

setup item.

End Point Adjuster  "EPA"

Setting item (channel and direction)

ST-LFT :Steering (left side)
ST-RGT :Steering (right side)
TH-FWD :Throttle (foward side)
TH-BRK :Throttle (brake side)
3C-UP

:3rd channel (up side)

3C-DWN :3rd channel (down side)

100%

S e t t i n g  i t e m  ( c h a n n e l  a n d 
direction) selection

- Select by (JOG) button left or right 

operation.

- The direction (ST-LFT and ST-RGT) 

linked with the steering wheel is 
switched.

- The direction (TH-FWD and TH-

BRK) linked with the throttle trigger 
is switched.

(Preparation)

- Before setup the steering wheel steering angle, set the steer-

ing D/R dial (initial setup: DL1) to the maximum steering angle 

position 100%.

- Select the setting item "ST-LFT" by (JOG) button up or down 

operation and make the following adjustments:

1

Steering (left side) adjustment

Turn the steering wheel fully to the left and 

use the (+) or (-) buttons to adjust the steering 

angle.

2

Steering (right side) adjustment

Turn the steering wheel fully to the right and 

use the (+) or (-) buttons to adjust the steering 

angle.

3

When adjusting the steering angle of another channel imme-

diately after this, see the adjustment method for that channel. 

When ending setting, return to the initial screen by pressing 

the (END) button twice (for direct selection, press the (END) 

button once).

Steering (EPA) adjustment

Adjust button

Adjust with the (+) and (-) but-
tons.

- Return to the initial value "100" 

by pressing the (+) and (-) but-
tons simultaneously for about 1 
second.

Steering EPA

ST-LFT

:0~120

ST-RGT

:0~120

Initial value :100

Summary of Contents for 3PKS





















































































































Reviews:

No comments