FUST NOVAMATIC WA914.1 E, User Manual

Page: 14 / 24

The display shows the number of hours
you set (e.g.
) and the indicator above
the button is on to show that his option
is active.
2. Touch the button
:
• The door is locked.
• The appliance starts the
countdown.
• When the countdown is completed,
the programme starts automatically.
You can cancel or change the
set of the Ende in/Fini dans
option before you touch the
button
. After touching the
button you can only cancel
the Ende in/Fini dans option.
To cancel the the Ende in/Fini dans
option:
a. Touch the button to set the
appliance to pause. The indicator
of button
flashes.
b. Touch the button until the
indicator above this button goes
off.
Touch the button
again to start
the programme immediately.
Interrupting a programme and
changing the options
You can change only some options before
they operate.
1. Touch
.
The indicator of this button flashes.
2. Change the options. If you change any
option the Ende in/Fini dans option (if
set) will be disabled.
3. Touch again.
The programme continues.
Cancelling a programme
1. Press the button for some seconds
to cancel the programme and to
deactivate the appliance.
2. Press the same button again to
activate the appliance. Now, you can
set a new washing programme.
Before starting the new
programme the appliance could
drain the water. In this case,
make sure that the detergent is
still in the detergent
compartment, if not fill the
detergent again.
Opening the door
While a programme (or the ) operates,
the appliance door is locked. The indicator
is on.
CAUTION! If the temperature
and level of the water in the
drum are too high, you cannot
open the door.
To open the door during the first
minutes of the cycle (or when the
operates) :
1. Touch the button
to pause the
appliance.
2. Wait until the indicator goes off.
3. You can open the door.
4. Close the door and touch the button
again. The programme (or the )
continues.
At the end of the programme
• The appliance stops automatically.
• The acoustic signal operates (if it is
activated).
• In the display comes on.
• The indicator of the button
goes off.
• You can open the door.
• Remove the laundry from the
appliance. Make sure that the drum is
empty.
• Press the button for some seconds
to deactivate the appliance.
• Close the water tap.
14