FUST NOVAMATIC WA714.1 E, User Manual

Page: 13 / 24

• Position A for powder detergent (factory setting).
• Position B for liquid detergent.
When you use the liquid detergent:
• Do not use gelatinous or thick liquid detergents.
• Do not put more liquid then the maximum level.
• Do not set the delay start (or Finish in option).
Activating the appliance
Press and hold for a couple of seconds
the On/Off button to activate or deactivate
the appliance.
A tune sounds when the appliance is
activated.
The display shows the word On.
Setting a programme
1. Touch the programme button and
set the programme:
• The indicator of the button
flashes.
• The display shows the programme
duration.
2. If necessary, change the temperature
and the spin speed or add available
options. When you activate an option,
the indicator of the set option comes
on.
If you set something incorrect,
the display shows the message
.
Starting a programme without
the Ende in/Fini dans option
Touch the button .
• The indicator of the button
stops to flash and stays on.
• The programme starts, the door
locks, the indicator is on.
• The drain pump can operate for a
short time at the beginning of the
washing cycle.
After approximately 15 minutes
from the start of the
programme:
• The appliance adjusts
automatically the
programme duration agree
with the laundry load.
• The display shows the new
value.
Starting a programme with the
Ende in/Fini dans option
1. Touch the button again and again
to choose the number of hours in
which you want the washing cycle to
be finished.
The display shows the number of hours
you set (e.g.
) and the indicator above
the button is on to show that his option
is active.
2. Touch the button
:
• The door is locked.
• The appliance starts the
countdown.
• When the countdown is completed,
the programme starts automatically.
You can cancel or change the
set of the Ende in/Fini dans
option before you touch the
button
. After touching the
button you can only cancel
the Ende in/Fini dans option.
To cancel the the Ende in/Fini dans
option:
a. Touch the button to set the
appliance to pause. The indicator
of button
flashes.
13