FUST NOVAMATIC WA 720 E, User Manual

Page: 13 / 52

(See "Washing programmes" for the maxi-
mum allowed spin speed).
Press this button repeatedly to change the
spin speed, if you want your laundry to be
spun at a different speed. The relevant pilot
light illuminates.
Select the available options by means
of buttons 3, 4, 5 and 6
Depending on the programme, different op-
tions can be combined. These must be se-
lected after choosing the desired pro-
gramme and before starting the pro-
gramme. When these buttons are pressed,
the corresponding pilot lights illuminate.
When they are pressed again, the pilot
lights go out. If an incorrect option is selec-
ted, the integrated
red pilot light of the but-
ton 7 flashes 3 times and the message Err
is displayed.
For the compatibility among the washing
programmes and the options see chapter
«Washing programmes» .
Start the programme by pressing
button 7
To start the selected programme, press this
button; the corresponding green pilot light
stops blinking.
The pilot light
9 illuminates to indicate that
the appliance starts operating and the door
is locked.
If you have chosen a delayed start, the ma-
chine will begin the countdown.
Important! If an incorrect option is
selected, the message Err is displayed for
a few seconds and the red pilot light of this
button blinks 3 times.
Select the Delay Start by pressing
button 8
Before you start the programme, if you wish
to delay the start, press this button to se-
lect the desired delay.
The selected delay time value will appear on
the display for a few seconds, then the du-
ration of the programme will appear again.
You must select this option after you have
set the programme and before you start the
programme.
You can cancel or modify the delay time at
any moment, before you press button
7 .
Selecting the delay start :
1. Select the programme and the required
options.
2. Select the delay start by pressing but-
ton 8 .
3. Press button 7 :
- the machine starts its hourly count-
down.
- the programme will start after the se-
lected delay has expired.
Cancelling the Delay Start after having star-
ted the programme:
1. Set the washing machine to PAUSE by
pressing button 7 .
2. Press button 8 once. On the display will
appear ' .
3. Press button 7 again to start the pro-
gramme.
Important!
• The selected delay can be changed only
after selecting the washing programme
again.
• The door will be locked throughout the
delay time. If you need to open the door,
you must first set the washing machine to
PAUSE by pressing button
7 and wait a
few minutes before opening the door. Af-
ter you have closed the door, press the
same button again.
Important! The Delay Start cannot be
selected with the draining programme.
Altering an option or a running
programme
It is possible to change some options be-
fore the programme carries them out.
Before you make any change, you must
pause the washing machine by pressing
button
7 .
Changing a running programme is possible
only by resetting it. Turn the programme se-
lector dial to
and then to the new pro-
gramme position. Start the new programme
by pressing button
7 again.
The washing water in the tub will be not
emptied out.
Interrupting a programme
Press the button 7 to interrupt a pro-
gramme which is running, the correspond-
ing pilot light starts blinking. Press the but-
ton again to
restart the programme.
13