Fusionstor INVENTO i737e SERIES, Manual

Page: 9 / 78

8 | P a g e
Chapter 3
System Interface
3-1 Overview
The control panel on the Fusionstor i737e has several LEDs and two buttons. There are also two LEDs on each hard drive carrier.
These LEDs keep you constantly informed of the overall status of the system and the activity and health of specific components.
3-2 Control Panel Buttons
There are two push-buttons located on the front of the chassis: a power on/off button and a reset button.
Power
This is the main power button, which is used to apply or turn off the main system power. Turning off system power with this button removes the main power
but keeps standby power supplied to the system.
3-3 Communications Panel Components
The Fusionstor Invento i737e Workstation features a front communication panel allowing easy access to the chassis communication
ports. The chassis models are equipped as follows:
• Two IEEE 1394a ports
• Two USB 2.0 ports
• Two USB 3.0 ports
• One audio port
• One microphone port
See diagram on the following page.