2.
Connect the cables to the PSUs.
5
Power-on Procedure
Power on the server using any of the following methods:
⚫
If PSUs are properly installed but are not connected to an external power supply, the server is
powered off. Connect the external power supply to the PSUs. Then the server will be powered
on with the PSUs.
⚫
If the PSUs are properly installed and connected to the external power supply, and the server
is in standby status (the power indicator is steady yellow),
Press the power button on the front panel to power on the server.
Power on the server using the iBMC WebUI.
Log in to the iBMC WebUI, choose
System
>
Power
>
Power Control
, click
Power
On
, and click
OK
.
Power on the server using the iBMC CLI.
Log in to the iBMC CLI, run the
ipmcset -d powerstate -v 1
command, and enter
y
or
Y
.
Power on the server using the Remote Virtual Console.
Log in to the Remote Virtual Console. On the KVM screen, click
or
on the
toolbar, select
Power On
, and click
OK
.
6
Follow-up Procedure
After the X6000 V6 server is installed and powered on, install an OS and drivers for the server.
For details, see the
FusionServer X6000 V6 Server User Guide
.
Obtain the document from https://www.xfusion.com.
7
FCC
Supplier’s Declaration of Conformity (SDoC)
Unique Identifier:
trade name:
xFusion
; product name:
Server
; model number:
X6000,
FusionServer X6000
Responsible Party- U.S. Contact Information
RAVV, Inc.
1748 Junction Ave, San Jose,
CA95112, United States
Tel: 408-791-6466
FCC Compliance Statement (for products subject to Part 15)
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Appendix: Hazardous Substance Statement for Electronic and
Electrical Products
Component
Hazardous Substances/Elements
Cadmium
(Cd)
Lead
(Pb)
Mercury
(Hg)
Chromium
(Cr) (VI)
Polybromi
nated
Biphenyls
(PBBs)
Polybromina
ted Diphenyl
Ether
(PBDEs)
Mechanical
parts such as
cabinets and
subracks
◯
-
◯
◯
◯
◯
Boards/Circuit
modules
◯
◯
◯
◯
◯
◯
Front panels
(board
panels)
◯
-
◯
◯
◯
◯
Cable
connectors
◯
-
◯
◯
◯
◯
Batteries
◯
-
◯
◯
◯
◯
Auxiliary
devices
◯
-
◯
◯
◯
◯
This table is prepared in accordance with the SJ/T 11364.
"O" indicates that the content of the hazardous substance contained in all of the homogenous
materials for the component is below the limit specified in GB/T 26572.
"-" indicates that the content of the hazardous substance contained in at least one
homogenous material exceeds the limit specified in GB/T 26572.
