background image

There is no sound coming from the subwoofer

• Verify that all connections are connected correctly to the 

proper terminals.

The system lacks bass

• Verify that the subwoofer is attached firmly to the mounting 

surface.

The audio is distorted

• Verify that the panels surrounding the subwoofer on the 

vessel are not rattling.

• Verify that the amplifier is connected to the subwoofer 

terminals correctly.

• If the subwoofer is connected to an amplifier, verify that the 

input level of the amplifier is matched to the output level of 

the stereo.
For more information, see the manual for the amplifier.

The LED lights will not turn on

• Verify that all wiring connections are correct and tight.

The LEDs pulse with the bass notes of the music

• Install a FUSION LED voltage regulator (SG-VREGLED).

Specifications

Max. power (Watts)

450 W

RMS power (Watts)

250 W

Efficiency (1 W/1 m)

88 dB

Frequency response (+ 3 dB)

From 30 Hz to 2 kHz

Min. mounting depth (clearance)

133 mm (5 

15

/

64

 in.)

Mounting diameter (clearance)

223 mm (8 

25

/

32

 in.)

Impedance

4 ohm

Amplifier power-rating 
recommendation

50 to 300 W RMS, playing 
music

Compass-safe distance*

520 cm (204  

23

/

32

 in.)

LED supply voltage (Sports model 
only)

From 10.8 to 16 Vdc

LED load current at 14.4 Vdc (Sports 
model only)

150 mA

Operating temperature range

From 0 to 50°C (from 32 to 
122°F)

Storage temperature range

From -20 to 70°C (from -4 to 
158°F)

Water and dust rating

IEC 60529 IP65

* This information is provided in accordance with the IEC 

Standard 60945. For more information, see below.

Subwoofer Compass-Safe Distance

All speakers and subwoofers contain magnets which are likely to 

cause interference with instruments on your boat. The size of 

the magnet used in the subwoofer affects how much 

interference the subwoofer may cause.
Interference can cause deviations and variations in the readings 

of sensitive navigational equipment, such as magnetic 

compasses. These deviations can cause inaccuracies or offsets 

in the readings, but will not harm the equipment. To alleviate the 

deviations, adjust the compass for the deviation following the 

manufacturer's instructions or move the subwoofer away from 

the navigational equipment. After moving a source of 

interference, you may need to recalibrate the compass.
To avoid deviations to navigational equipment, position the 

subwoofer so it is separated from the navigational equipment by 

at least the distance listed in the table below.

Direction from Subwoofer

10" Subwoofer

À

302 cm (9 ft. 11 in.)

Á

295 cm (9 ft. 9 in.)

Â

513 cm (16 ft. 10 in.)

Ã

277 cm (9 ft. 2 in.)

Ä

295 cm (9 ft. 9 in.)

Å

488 cm (16 ft.)

Optimum Enclosure Recommendations

Sealed enclosure volume*

17.2 L (0.6 ft.

3

)

Ported (vented) enclosure volume**

45 L (1.6 ft.)

3

)

Port diameter

104 mm (4 in.)

Port length

265 mm (10 

29

/

64

 in.)

* Fully filled with absorption material.
** Lined with absorption material.

Installation Instructions

5

Summary of Contents for Signature Series



































Reviews: