Options
Press
MENU
button on the remote and
◄
/
►
use to cycle to
OPTION
page below:
OSD Language:
Set current menu language
»
Select
OSD Language
Audio Language:
Set audio language
»
Select
Audio Language
»
Press
◄
or
►
to cycle through available languages:
Subtitle Language:
Set subtitle language
»
Select
Subtitle Language
»
Press
◄
or
►
to cycle through available languages:
Hearing Impaired:
»
Select
Hearing Impaired
»
Select
ON
or
OFF
PVR File System:
(Reference ‘PVR File System’ on following page)
OSD Time Out:
»
Select
OSD Time Out
»
Select from
OFF,
or from
10S - 90S
Blue Screen:
»
Select
Blue Screen
»
Select
ON
or
OFF
for whether a Blue Screen is displayed when there is no signal input.
(Except MEDIA and DVD)
Restore Factory Default:
»
Select
Restore Factory Default
to restore to initial settings
Sound
Press
MENU
button on the remote and
◄
/
►
use to cycle to
SOUND
page below:
Sound Mode:
»
Select
Sound Mode
»
Press
◄
or
►
to cycle through available sound modes:
Standard, Music, Movie, Sports
and
User
.
Note:
Treble and Bass can only be changed under
User
.
Adjust Balance:
»
From the
SOUND
menu select
Balance
Auto Volume:
»
From the
SOUND
menu select
Auto Volume.
»
Select
ON
or
OFF
SPDIF Mode:
»
From the
SOUND
menu select
SPDIF MODE.
»
Press
▲
or
▼
to cycle through available modes for SPDIF:
PCM, Auto,
or
Off
.
010
003
Connections
Y
IN
VIDEO
L
R
USB 2
HDMI 2
IN
RF
IN
IN
Y
PB
PR
Bottom Connection Panel:
Side Connection Panel:
12V DC
IN
USB 1
HDMI 1
IN
VGA
AUDIO VIDEO
OUT
IN
L
R
EAR
PHONE
OUT
OUT
COAXIAL
Power:
Connect the AC power pack or 5M DC fly lead to the
12V DC IN
connection on the TV.
USB 1:
Insert the
USB
flash drive into the
USB
slot on the TV.
Select the
USB
input source using the
MEDIA
or
INPUT
button on the remote.
HDMI 1:
Connect the
HDMI
output of the accessory device to the
HDMI
input on the TV.
Select the
HDMI
input source using the
INPUT
button on the remote.
VGA/Audio In:
Connect the
RGB
output of the PC to the
VGA
input on the TV.
Connect the PC audio output of the PC to the
Audio
input jack on the TV
Select the
VGA
input source using the
INPUT
button on the remote.
Video/Audio Out:
Connect the
AUDIO
output from the television to the
AUX
input of the device using the
supplied A/V cable (White and Red [left and right audio]).
Connect the
VIDEO
output from the television to the Composite
VIDEO
input of the device
using the supplied A/V cable (Yellow [video]).
NOTE
: Video out functionality is only available through the DTV, ATV and AV sources.
Video out will not work on HDMI, MEDIA, or Y Pb Pr.
Antenna Connection
To ensure good picture and sound, a Terrestrial TV antenna system needs to be
installed. For best reception, an outdoor antenna is recommended.
NOTE:
•
Do not put the Coaxial cable close to the mains lead to avoid noise.
•
Do not place the Coaxial cable under the TV.
•
Additional equipment, cables and adapter plugs shown are not supplied with
this TV set.
•
To obtain optimum quality picture and sound, an Aerial, the correct cable (75 Ω
coaxial) and the correct terminating plug are required.
•
Your local dealer may be able to assist you in obtaining the correct Aerial system
for your particular area and the accessories required.
Video/Audio In:
Connect the
VIDEO
and
AUDIO
output jack of the DVD or VCR to the
VIDEO/L/R IN
jacks
using an AV cable (Yellow [Video], White and Red [left and right audio]).
Select the AV input source using the
INPUT
button on the remote.
RF IN:
Connect the antenna to the
RF IN
connection. Please refer to the Antenna Connection
paragraph below.
Y/Pb/Pr In:
Connect the
Y Pb Pr
output of the accessory device to the
Y Pb Pr
input on the TV.
Connect the Audio output of the accessory device to the
L/R IN
input jacks on the TV
using the
RCA
cable.
Select the
Y Pb Pr
input source using the
INPUT
button on the remote.
HDMI 2:
Connect the
HDMI
output of the accessory device to the
HDMI
input on the TV.
Select the
HDMI
input source using the
INPUT
button on the remote.
USB 2:
Insert the
USB
flash drive into the
USB
slot on the TV.
Select the
USB
input source using the
MEDIA
or
INPUT
button on the remote.
