Fusion MS-DAB100A Installation Instructions Download Page 4

Specification

Value

Storage temperature range

From -20 to 70°C (from -4 to 
158°F)

Compass-safe distance

5 cm (2 in.)

Antenna

Specification

Value

Maximum dimensions with whip 
antenna and base (H × W)

248 × 110 mm (9.76 × 4.33 in.)

Antenna base diameter

74 mm (2.91 in.)

Antenna cable length

10 m (32.8 ft.)

Antenna cable connector

FAKRA Z-Type waterblue female

Weight (excluding cable)

170 g (6 oz.)

Water rating

IEC 60529 IPX7

Operating temperature range

From 0 to 50°C (from 32 to 122°F)

Frequencies

DAB band III (174 through 
240 MHz)

Impedance

50 Ohms

Polarization

Vertical

LNA Gain

22 dB (typical)

Voltage standing wave ratio 
(VSWR)

Less than 2.5:1

Input voltage

From 6 to 16 Vdc

Input current

13 mA

Maximum power

312 mW

Compass-safe distance

5 cm (2 in.)

Software Updates

Updates for this device are included in the software updates for 

a compatible stereo. To make sure the device functions correctly 

with your compatible stereo, you should update the software in 

all FUSION devices after you install this device.
Go to 

www.fusionentertainment.com/marine

 to download the 

latest software. Software updates and instructions are available 

on your device product page.

Getting the Owner's Manual

You can get the latest owner's manual and translations of 

manuals from the web.

1

Go to 

www.fusionentertainment.com/marine

.

2

Select your product.

3

Select 

Manuals & Downloads

.

4

Select a manual.

Garmin

®

, the Garmin logo, FUSION

®

, and the Fusion logo are trademarks of Garmin Ltd. 

or its subsidiaries, registered in the USA and other countries. These trademarks may not 

be used without the express permission of Garmin.

© 2015 Garmin Ltd. or its subsidiaries

www.garmin.com/support

Summary of Contents for MS-DAB100A

Page 1: ...ass and overtightened It is recommended to apply an anti seize lubricant on the screws before installing them When selecting a mounting location for the device observe these considerations Due to the water rating this device must be mounted and the wiring connections must be made in a non submerged location The device and its wiring connectors must not be exposed to spray or wash down The device s...

Page 2: ...e 2 With the antenna installed on the bracket or pole fill the gap in the vertical cable slot  with marine sealant optional 3 Select an option If you installed the antenna on the included bracket use the included screws to secure the bracket to the mounting surface If you installed the antenna on a pole attach the pole to the boat if it is not already attached 4 Route the cable away from sources ...

Page 3: ...u are routing the cable through the side of the antenna insert it through the opening in the side and adhere the seal pad to the bottom of the antenna 10Select an option If you are mounting the antenna with the threaded rods and thumbscrews proceed to step 11 If you are mounting the antenna with the double sided seal pad remove the paper backing from the other side of the seal pad press it firmly ...

Page 4: ...ce 5 cm 2 in Software Updates Updates for this device are included in the software updates for a compatible stereo To make sure the device functions correctly with your compatible stereo you should update the software in all FUSION devices after you install this device Go to www fusionentertainment com marine to download the latest software Software updates and instructions are available on your d...

Reviews: