www.fusionelectronics.com
PUBLISHED BY FUSION ELECTRONICS LIMITED: © Copyright 2009 by FUSION Electronics Limited. All rights reserved. Specifications and design are subject to change without notice.
YOU CAN HELP PROTECT THE ENVIRONMENT! Please remember to respect the local regulations: Hand in the non-working electrical equipment to an appropriate waste disposal center.
FUSE
POWER
REM
+12
GND
LOW INPUT
RIGHT
LEFT
LEVEL
MIN
MAX 30Hz
250Hz
L.P.F
MS-AB108
Connect black wire
to negative of vessel
(Ground)
Connect red wire to positive
(+12V) battery terminal
Connect blue wire to source
unit’s accessory lead or
switched 12 volt source
(Remote)
+12 Vessel Battery
Power Plug
RCA cable
Fuse
Connect to
subwoofer pre-out
on source.
WIRING
Be sure to use the supplied power extension cable.
Connect the ground wire (Black wire) to the negative of the vessel
(Ground) Note: clean dirt, corrosion and paint to bare metal.
Connect the 12 volt (red wire) to the positive battery terminal of the
vessel; Make sure the fuse is close to the battery.
Connect the remote on (blue wire) to the remote turn on lead of the
Headunit. - If your head unit does not have a remote turn-on lead,
connect a switched 12v power lead to the unit.
Connect the RCA cables to source
Check all connections.
Finally, connect the power plug end of the power harness to the unit.
»
»
»
»
»
»
v 1.0
