12
2. Rotate the Encoder Volume knob to select the desired
selection within the field then, press ENTER to confirm.
NOTE
When searching for Album, Artist, Song etc, rotate the Encoder
Volume Control clockwise to search from A-Z or anti-clockwise
for Z-A search.
RANDOM PLAY
Press RDM to cycle between the following modes:
RDM FLD – Plays the current album randomly.
RDM ALL – Plays the whole iPod/iPhone library randomly.
RDM OFF – Turns the Random function off.
iPod/iPhone MASTER CONTROL MODE
Press the button to switch between the two
control options
• Unit control mode: Use the head unit controls to select
Track/Artist/Album/Playlist etc. This is the Default setting.
• iPod/iPhone control mode: Use the iPod/iPhone to select
the Artist/Album/Track etc.
This mode is useful if you need to sort through a large
amount of Tracks/Albums etc.
NOTE
Please ensure the iPod/iPhone cable is connected correctly to the
USB port and only use an original iPod / iPhone data sync cable.
BASIC SEARCH – PLAYLIST/ARTIST/ALBUM/SONG on
iPod/iPhone
Press BAND to browse the iPod/iPhone menu.
Then rotate the Encoder Volume Control clockwise to and
press ENTER to choose one of the following selections,
then follow the steps below:
PLAYLIST Rotate the Encoder Volume control to select
your desired Playlist and press ENTER to start play.
ARTIST Rotate the Encoder Volume Control to select your
desired Artist then press ENTER. Rotate the Encoder
Volume Control to then select an Album & press ENTER.
Rotate the Encoder Volume Control again to select a song
within the selected Album.
ALBUM Rotate the Encoder Volume Control to select your
desired Album and press ENTER to select it. Then rotate
the Encoder Volume Control to select a specific song
within the selected Album.
SEARCH FOR FURTHER CONTENT on iPod/iPhone
In addition to the PLAYLIST/ARTIST/ALBUM seach
functions, there are also additional fields you can search
on your iPod or iPhone – the full list of fields is as follows:
PLAYLIST / ARTIST / ALBUM / SONG / GENRE / COMPOSER
/ AUDIOBOOK / PODCAST
1. Rotate the Encoder Volume knob to select the desired
search field, then press ENTER to confirm.
