13
Using the DC cable clips
By directly connecting the power inverter to a 12 V
battery using the DC cable clips, you can operate
products with power requirements for 300 W.
1. Follow steps 1 and 2 above (Using the DC Cable
with cigarette lighter plug) to attach the ring type
connectors.
2. Attach the negative (black) clip to the negative (-)
battery terminal.
3. Attach the positive (red) clip to the positive
(+) battery terminal. Make sure both clips are
securely connected to the battery terminals, as a
loose connection will cause the voltage to drop
and may cause the cables to overheat, resulting in
equipment damage or fi re.
4. Switch the power inverter “ON.”
5. When the power inverter is not in use, disconnect
the DC cable clips from the battery to prevent
slight discharge of battery.
Summary of Contents for 300W INVERTER
Page 1: ...INVERTER 300W 2218174 Owner s Guide...
Page 2: ......
