Fusion Garage Grid10 Manual Download Page 8

Operating Temperature & Rating Output 
Operating temperature: 10 ~ 35 degrees Celsius
Rating output: 19V, 2.1A

Regulatory Notices 
Class B: FCC Warning! 
This equipment has been tested and found to comply with 
the limits for a Class B digital device, pursuant to part 15 
of the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference in a 
residential installation. This equipment generates, uses 
and can radiate radio frequency energy and, if not installed 
and used in accordance with the instructions, may cause 
harmful interference to radio communications. However, 
there is no guarantee that interference will not occur in a 
particular installation. If this equipment does cause harmful 
interference to radio or television reception, which can be 
determined by turning the equipment off and on, the user 
is encouraged to try to correct the interference by one or 
more of the following measures:

This device complies with part 15 of the FCC Rules. 
Operation is subject to the following two conditions: (1) 
This device may not cause harmful interference, and (2) 
this device must accept any interference received, 
including interference that may cause undesired operation.
other antenna or transmitter.

- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment 
   and  receiver. 
- Connect the equipment into an outlet on a circuit  

 

   different from that to which the receiver is connected. 
- Consult the dealer or an experienced radio/TV 
   technician for help.

CAUTION:
Any changes or modifications not expressly approved 
by the grantee of this device could void the user's 
authority to operate the equipment.

RF exposure warning
The equipment complies with FCC RF exposure limits 
set forth for a uncontrolled environment. The equipment 
must not be co-located or operating in conjunction with 
any other antenna or transmitter.

SAR Value: 
1.33W/kg (3G) 
0.472W/kg (WLAN)

Use only shielded cables to connect I/O device to 
this equipment. You are cautioned that changes or 
modifications not expressly approved by the party 
responsible for compliance could void your authority 
to operate the equipment.

NOTE: This device does not provide wireless 
hotspot services.

Summary of Contents for Grid10











Reviews: