Furuno PFX-50, Operator'S Manual

Page: 30 / 36

2. Connection
Connect a modular plug to the "LINE" jack on the rear side of the PFX-50. See the
figure below. Another modular plug should be connected to either the Junction Box
via a modular jack box or the Communication Unit directly, depending on number
of facsimile. For further details, refer to the Installation Manual of the FELCOM.
3. Changing dialing format
Change dialing format from "pulse (dial)" to "pushbutton".
2
Earth
Terminal
Dialing Format
Line
Connector Not used
Pulse/Tone
Select Switch
Set it to "T".
("T" means
pushbutton.)
Incoming Volume
Switch
Set the volume of
incoming calls to
HIGH or LOW.
Ringing Tone
Select Switch
Set the ringing tone
to OFF, LOW or HIGH.
Only for telephone