Furuno NX-300-D, Operator'S Manual

Page: 31 / 57

3-1
3. SYSTEM MENU
3.1 Units of Measurement
When navigational data is fed to the NX-300, you can select units of distance and speed to use.
Distance/speed can be displayed in nautical miles/knots, kilometers/kilometers per hour, or
miles/ miles per hour. The default setting is nautical miles/knots.
1. Press the [MENU] key to open the main menu.
2. Press
!
or
"
to select SYSTEM MENU.
3. Press the [ENT] key. The SYSTEM MENU appears.
Figure 3-1 SYSTEM MENU
4. Press the [ENT] key. The following window appears.
Figure 3-2 UNITS window
5. Press
!
or
"
to select combination desired; nm, kt; km, km/h; mi, mi/h.
6. Press the [ENT] key.
7. Press the [MENU] key or [DISP] key to close the SYSTEM MENU.