2. STEERING MODES
2-14
4. Push the
Course control
knob to start the turn.
The message “Start to turn by fishing mode“ appears, then your boat starts the
turn selected.
Note:
The orbit and spiral turns require that the speed of the boat be less than 10
kn. If the speed is higher, the message "Too fast to go fishing mode." appears.
Reduce boat's speed to less than 10 kn.
During the turn, the ship mark, which indicates own ship’s course movement, appears
on the turn display. The ship mark does not show accurate ship’s movement. To quit
the turn, press the
key.
After the turn is completed, the message "Turn ended." appears.
Circle turn
Orbit turn
The rate of turn
䋨
See section 2.6.3.
䋩
Ship mark
Ship mark
Ship mark
Ship mark
Radius
䋨
See section 2.6.3.
䋩
Radius
䋨
See section 2.6.3.
䋩
Summary of Contents for NAVpilot 711C
