manualshive.com logo in svg

Furuno MODEL CSH-73, Operator'S Manual

The Furuno MODEL CSH-73 Operator's Manual is an essential companion for users of this advanced marine navigation device. With its user-friendly interface and comprehensive instructions, this manual provides crucial information for proper set-up, operation, and troubleshooting. Download this manual for free from our website manualshive.com to unlock the full potential of your Furuno CSH-73.

Share
Download
background image

 ii

TABLE OF CONTENTS

FOREWORD

A Word to CSH-73 Owners ...................................................................................................... v
Features ..................................................................................................................................... v
System Configuration .............................................................................................................. vi

CONTROL DESCRIPTION

Control Layout on Display Unit and Remote Control Box ...................................................1-1
Main Panel ............................................................................................................................. 1-2
Sub Panel 1 ............................................................................................................................1-4
Sub Panel 2 (data setting window) ........................................................................................1-5
Remote Control Box .............................................................................................................. 1-8

OPERATIONAL OVERVIEW

Turning the Power On/Off ..................................................................................................... 2-1
Adjusting Screen Brilliance, Control Panel Backlighting ..................................................... 2-1
Lowering the Transducer .......................................................................................................2-1
Selecting a Display Mode ...................................................................................................... 2-2
Selecting a Display Range ..................................................................................................... 2-3
Setting the Tilt Angle ............................................................................................................. 2-3
Adjusting the Gain ................................................................................................................. 2-4
Measuring Range and Bearing to a Target ............................................................................. 2-4

FINE TUNING THE PICTURE

Eliminating Unwanted Feeble Echoes ...................................................................................3-1
Suppressing Seabed Tail ........................................................................................................3-3
Suppressing Seabed and Sea Surface Reflections in Shallow Waters ................................... 3-4
Rejecting Sonar Interference and Noise ................................................................................3-4
Adjusting Beamwidth ............................................................................................................3-7

MARKS AND DATA

Marks, Data and Display Mode ............................................................................................. 4-1
Permanently Displayed Marks and Data ...............................................................................4-3
Erasable Marks and Data .......................................................................................................4-4

USER MENU OVERVIEW

USER Menu Operation .......................................................................................................... 5-1
USER Menu Description .......................................................................................................5-3

Summary of Contents for MODEL CSH-73







































































































Reviews:

No comments

Related manuals for MODEL CSH-73

Klein Marine Systems, Inc. HydroChart 5000 Operation And Maintenance Manual preview
HydroChart 5000
Brand: Klein Marine Systems, Inc. Pages: 82

Brands by name

Popular brands

Load more brands