8
Short Press for “HOME”
Long Press for “BRILL”
Press [
-/
▲
] or [
+/
▼
] to select a page and [
ENT] to open
the selected page.
Press [
-/
▲
] or [
+/
▼
] to adjust the brillaince and
[
CANCEL] to close the window. To turn off the unit, place
a cursor with the joystick on [Power Off This Device] or
[Power Off Network] and press it.
Note:
It is not possible to turn on the TZT9/14/BB with the MCU002 although the power can be turned off as shown above.
3-3. Showing a Cross Cursor – New with Model TZT9/14/BB v3.12
The TZT9/14/BB v3.12 program has new setting options of
Cross Cursor
and
Cross Cursor Speed
, which enables to
show a cross cursor on the screen and adjust its speed. With the MCU002, the cross cursor will help to see a present
cursor location.
Menu Settings
Cross Cursor on Screen
[Menu] – [General] – [
Cross Cursor] – [ON]
While the joystick in operation, the gray, thick cross cursor
appears on the screen.
[Menu] – [General] – [
Cross Cursor Speed] – [1] to [20]
The cursor speed can be adjusted between [1] and [20]:
[1] – slowest, [8] – default, and [20] – fastest.