Furuno GS-100, Operator'S Manual

Page: 96 / 157

8. INSTALLATION
8-18
3. Select [1 Unit of Distance] or [3 Unit of Depth] and
go to step 4, or select [2 cm/sec Display] and go to
paragraph 3.1.3.
4. Select the unit.
The unit of the own ship’s speed changes, depend-
ing on the selection at [1 Unit of Distance] as fol-
lows:
5. Press the MENU ESC key to close the main menu.
8.3.4 Datum
Your unit is programmed to recognize most of the major chart systems of the world.
Although the WGS-84 system, the GPS standard, is now widely used other categories
of charts still exist. Select the same datum which is used in your nautical charts.
1. Press the MENU ESC key to open the main menu.
2. Select [7 System Setting] then [1 System].
3. Select [4 Datum].
4. Select an option. For [6 Other], go to step 5. For others, go to
step 7.
5. Enter the datum number with the numeric keys.
6. Move the cursor to [Enter] then press the
ENT
key.
7. Press the MENU ESC key to close the main
menu.
8.3.5 Time format
UTC or Local
1. Press the MENU ESC key to open the main menu.
2. Select [7 System Setting] then [1 System].
3. Select [5 Local Time].
4. Select [1 UTC] or [2 Local]. For [2 Local], go to step 5.
For [1 UTC], go to step 7.
5. Enter the difference time with the numeric
keys. To switch b and -, select it then
press one of keys from
0 to 9 .
6. Move the cursor to [Enter] then press the ENT
key.
7. Press the MENU ESC key to close the main
menu.
[1 NM]: kn [2 km]: km/h [3 SM]: SM/h
Distance Depth