3. TRACK
3-3
3.5
Hiding the Track
The track lines can be hidden (but recorded). This function is useful when there are
too many tracks to distinguish on the screen and it is hard to distinguish one from an-
other.
1. Choose TRACK from the PLOTTER menu and then push the [ENTER] knob.
2. Choose VISIBLE and then push the [ENTER] knob.
3. Rotate the [ENTER] knob to select On.
To re-display the track, choose Off.
4. Press the [MENU] key to close the menu.
3.6
Track Plotting Method and Interval
In drawing the own ship track, first the ship's position fed from the internal GPS navi-
gator is stored into the unit's memory at an interval of time or distance. A shorter inter-
val provides for better reconstruction of the track, but the storage time of the track is
reduced. When the track memory becomes full, the oldest track is erased to make
room for the latest.
3.6.1
Track plotting method
Track may be plotted by time or distance.
1. Choose TRACK from the PLOTTER menu.
2. Choose STEP UNIT and then push the [ENTER] knob.
STEP UNIT window
3. Rotate the [ENTER] knob to select Dist (distance) or Time as appropriate.
Distance is useful for conserving track memory, since no track is recorded when
the boat is stationary.
4. Push the [ENTER] knob.
5. Press the [MENU] key to close the menu.
Dist
Time
www.reelschematic.com
www.reelschematic.com
