2
Registering Waypoints
A waypoint can be entered several ways.
Below is the procedure for entry by the
cursor.
1. Operate the cursor pad to place the
cursor on the location where you want to
inscribe a waypoint.
2. Press the [ENT] key.
ENTER A NEW WPT NAME.
0 0 1 _ _ _ ?
( 001: DEFAULT NAME )
Quit : [MENU]
CURSOR POS.
→
WPT
3. Press the [ENT] key to save the waypoint
under the number shown.
NAME: 001
34
°
44.000'N MARK
135
°
21.000'E x
10-FEB-02 11:22D
TTG 09H03M ETA: 00:48
Exit?
LOG RTE?
4. Place the cursor under “MARK”.
5. Press the [ENT] key.
6. Press
!
or
"
to choose mark shape
desired.
7. Press the [ENT] key.
8. Choose “Exit?” and then press the [ENT]
key.
Registering Routes
1. Press the [MENU] key once or twice to
display the menu.
2. Choose ROUTES.
3. Press the [ENT] key.
4. Press the [ENT] key.
5. Press the [ENT] key, choose waypoint
and then press the [ENT] key.
6. Repeat step 5 to add other waypoints to
the route.
7. Choose “Exit?”.
8. Press the [ENT] key to register the route.
Setting, Cancelling
Destination
Destination can be set several ways. Below
is the method for setting destination by the
cursor.
To set destination by cursor
1. Press the [GOTO] key.
2. Choose “CURSOR?”.
3. Press the [ENT] key.
4. Use the cursor pad to place the cursor on
position to set as destination.
5. Press the [ENT] key.
To cancel destination
1. Press the [GOTO] key.
2. Choose “OFF?”.
3. Press the [ENT] key.
Setting the Arrival Alarm
1. Press the [MENU] key once or twice to
display the menu.
2. Choose ALARMS.
3. Press the [ENT] key.
4. Choose ARV/ANC and press the [ENT]
key.
5. Choose ARV and then press the [ENT]
key.
6. Press the [ENT] key and then enter arrival
alarm range with the cursor pad.
7. Press the [ENT] key.
8. Press the [MENU] key twice to finish.
To disable the arrival alarm, select OFF at
step 5.
P U B . N O . O S E – 4 4 2 0 0 – A
( 2 0 0 2 / 0 5 , D A M I ) G P – 3 2 / 3 7
