DGPS NAVIGATOR GP-37
GPS NAVIGATOR GP-32
Operator’s Guide
The purpose of this Operator's Guide is to provide basic operating procedures for this
equipment. For more detailed information see the Operator's Manual.
Choosing Display Mode
Press the [DISP] key until desired display
appears.
[Highway Display]
COG
BRG
RNG
SOG
0.5
XTE
0.05
242
°
0.05 0.05
17.5
004
n
m
[Plotter Display]
D2D
[ 5 ]
n
m
SOG:
10.0 k
t
34
°
44.000N 135
°
21.000E
X
D2D MAG
15:37
N
E
30 60
300 330
SOG:
kt
COG:
RNG:
BRG:
TTG:
ETA:
1H30M
12:30
17.5 nm
242
°
[Steering Display]
(Display format
depends on user setting.)
CURSOR
[+]
n
m
k
t
[Nav Data Display]
D2D
02-FEB-02 15:37:40
SOG:
kt
CSE:
34
°
44. 000'
N
135
°
21. 000'
E
10.0
357
°
COG:
357
°
357
°
10.0
10.0
357
°
[User Display: Speedometer]
(Display format
depends on user setting.)
20
30
40
60
0
10
0
9.9
KT
SOG
[User Display: Digital Data]
POWER(V) SOG(KT)
TRIP(NM)
COG(
°
)
9.99
5.6
12.1 9.9
[DISP] key
[DISP] key
[DISP] key
[DISP] key
[DISP] key
[DISP] key
Choosing Display Range
1. Press the [MENU] key.
2. Press the [ENT] key.
3. Press
!
to increase;
"
to decrease.
4. Press the [ENT] key to close the window.
Shifting the Cursor, Display
1. On the plotter display, press the cursor
pad to turn on the cursor. Use the cursor
pad to shift the cursor.
2. Place the cursor on an edge of the screen.
Use the cursor pad to shift the display.
Centering Own Position
1. Press the [MENU] key.
2. Choose “SHIP TO CENTER?”.
3. Press the [ENT] key.
Entering MOB Mark
1. Press the [MARK/MOB] key several
seconds.
2. Choose YES.
3. Press the [ENT] key.
