manualshive.com logo in svg

Furuno GP-1850 Series, Installation Manual, Page: 16 / 40

Share
Download
Furuno GP-1850 Series Installation Manual Download Page 16

3-4

3.3 Antenna Height

1. Press the [MENU] key.

2. Press the software key labeled "GPS/DGPS/TD OPTIONS".

3. Press the software key labeled "GPS SETUP OPTIONS".

4. Select "ANT. HEIGHT" by the arrow key.

5. Press the software key labeled "EDIT".

ANT. HEIGHT

 

0

 0 5 m

Figure 3-4  Antenna Height Display

6. Enter the height (3 digits) of the antenna above sea level using the numeric

keys.
If you enter wrong antenna height, press the software key labeled "CLEAR".

7. Press the [ENTER] key.

8. Press the [PLOT] key to finish.

3.4 Baud Rate Setting (GP-1850D only)

This setting may not be done when selecting AUTO MODE.

1. Press the [MENU] key.

2. Press the software key labeled "GPS/DGPS/TD OPTIONS".

3. Press the software key labeled "DGPS SETUP OPTIONS" to display the fol-

lowing message.

s

 FORMAT

NMEA 0183
   VER 1.5

DGPS 3D

DGPS

OPTION

RETURN

   DGPS MODE

ON

   BEACON FREQUENCY

AUTO

s

BEACON BAUD RATE

AUTO

   DGPS ALARM

OFF

EDIT

Figure 3-5  DGPS Setup Options Display

Summary of Contents for GP-1850 Series









































Reviews:

No comments