3-2
DGPS port
1. Press the [MENU] key.
2. Press the software key labeled "CONFIGURATION".
3. Press the software key labeled "SETUP NMEA/DGPS PORT2".
4. Select "FORMAT" by the arrow key.
5. Press the software key labeled "EDIT" to display the following
message.
s
FORMAT
NMEA 0183
VER 1.5
▲▲▲
OUTPUT FORMAT
NMEA0183 Ver1.5
'
NMEA0183 Ver2.0
RTCM104 (EXTRN)
RTCM104 (INTRN)
DGPS 3D
SETUP
PORT2
ENTER
CANCEL
▼
▲
RTCM104 (OUTPUT)
Figure 3-2 Output Format Display
6. Select NMEA version, external DGPS or internal DGPS by the
arrow key. The selected item is indicated by black button.
NMEA0183 Ver1,5/Ver2,0
:Select one when connecting
PC or RS-232C equipment.
RTCM104(EXTRN)
:Select this when connecting
e x t e r n a l D G P S b e a c o n
receiver.
RTCM104(INTRN)
: Select this for builtin internal
DGPS beacon receiver.
RTCM104(OUTPUT)
:Select this when outputting
d i f f e r e n t i a l d a t a o f t h e
internal DGPS beacon receiver
to other GPS navigator.
Note1) Note that you cannot setup sentences when you select
RTCM104 at the format.
Note2) For RS-422 format, the level converter (IF-1432) is required
for connection of external equipment.
7. Press the software key labeled "ENTER" or the [ENTER] key.
8. Press the [PLOT] key to finish.