Furuno FSV-35, Operator'S Manual

Page: 98 / 144

6. OTHERS MENU
6-4
Bearing Ref : Selects how to reference bearing for the vertical bearing marker. The
choices are ship’s heading and North.
TILT lever : Selects function of the TILT control. [Tilt] sets the tilt only. [Tilt & V1] sets
the bearing of the vertical 1 display in the vertical display and sets the tilt in the hori-
zontal display./
Auto Tilt : Selects the auto tilt angle, Wide (±2° to 10°, ±4° to 16°, ±6° to 20°) or Narrow
(±1° to 4°, ±2° to 6°, ±3° to 8°).
Net Course Mark : Inscribes/deletes the net course mark. For details, see
section 2.19.
Key Beep Volume : Sets the volume of the beep which sounds for key operation. The
setting range is 0 to 7. “0” turns off the key beep.
TimerDisplay : Set [ON] to show the timer window at the bottom left of the display. The
timer window can be moved by drag and drop operation. Operate the timer window as
shown below.
1. Select [ ] on the timer window and push the left-click button to start the timer.
The icon [ ] on the timer window changes to
= ٨
].
2. Select
= ٨
] on the timer window and push the left-click button to stop the timer.
The icon
= ٨
] on the timer window changes to [ ].
3. Select [ ] on the timer window and push the left-click button to reset the timer.